Publications

 

  • H. L. Chan, R. Auguste, E. Romanovskaia, A. L. Morales, F. Schmidt, V. Romanovski, C. Winkler, J. Qiu, Y. Wang, F. Selim, D. Kaoumi, B. P. Uberuaga, P. Hosemann, J. R. Scully, Multi–Length Scale Characterization of Point Defects in Thermally Oxidized, Proton Irradiated Iron Oxides, Acta Materialia, 30 March 2023, 101762. Link.

  • Schoell, J. Kabel, S. Lam, A. Sharma, J. Michler, P. Hosemann, D. Kaoumi, Corrosion Behavior of a Series of Combinatorial Physical Vapor Deposition Coatings on SiC in a Simulated Boiling Water Reactor Environment, Journal of Nuclear Materials, vol 572, 2022, 154022. Link

  • Beausoleil, M. E. Parry, K. Mondal, S. Kwon, T. D. Sparks, L. Gomez Hurtado, D. Kaoumi, J. Aguiar, Spark Plasma Sintered MoNbTi based Multi Principal Element Alloys with Cr, V, and Zr, Journal of alloys and compounds, 927, 2022, 167083. Link

  • R. Auguste, H. L. Chan, E. Romanovskaia, J. Qiu, R. Schoell, M. O. Liedke, M. Butterling, E. Hirschmann, A. G. Attallah, A. Wagner, F. A. Selim, D. Kaoumi, B. P. Uberuaga, P. Hosemann, J.R. Scully; A Multimodal Approach to Revisiting Oxidation Defects in Cr2O3, NPJ Materials Degradation, Journal of Materials Degradation, 6:61, 2022. Link

  • Saptarshi, M. DeJong, C. Rock, I. Anderson, R. Napolitano, J. Forrester, S. Lapidus, D. Kaoumi, T. Horn, Laser Powder Bed Fusion of ODS 14YWT from Gas Atomization Reaction Synthesis Precursor Powders, JOM, 2022. Link

  • Schoell, L. Xi, Y. Zhao, X. Wu, Y. Hong, Z. Yu, P. Kenesei, J. Almer, Z. Shayer, D. Kaoumi, Mechanism of chlorine-induced stress corrosion cracking of two 304 SS heats in simulated marine environment through in situ X-ray tomography and diffraction: Role of deformation induced martensite and crack branching, Materials Characterization, 190, 2022, 112020. Link

  • Jublot-Leclerc, M. Owusu-Mensah, V. Borodin, J. Ribis, L. Largeau, R. Schoell, D. Kaoumi, M. Descoins, D. Mangelinck and A. Gentils, Synthesis of metallic nano-oxide particles by implantation of Ti, Y and O ions in Fe-10%Cr: towards an understanding of precipitation in ODS steels, Materials, invited paper, Materials, 15, 2022, 4857 (journal highlighted paper). Link

  • R. Schoell, L. Xi, H. West, P. Hosemann, D. Kaoumi, Investigation of the fatigue crack behavior of 304 stainless steels using synchrotron X-ray tomography and diffraction: Influence of the martensite fraction and role of inclusions, Materials Characterization,188, 2022, 111903. Link

  • M. Owusu-Mensah, J. Cooper, A. Lopez Morales, K. Yano, S. D. Taylor, D. K. Schreiber, B. P. Uberuaga, D. Kaoumi, Surprisingly high irradiation-induced defect mobility in Fe3O4 as revealed through in situ Transmission Electron Microscopy, Materials Characterization, 187, 2022, 111863. Link

  • T. Horn & C. Rock, D. Kaoumi, I. Anderson, E. White, T. Prost, J. R., S. Saptarshi1, R. Schoell, M. DeJong, S. Timmins, R. Napolitano, D. Zhang, J. Darsell, Oxide Dispersion Strengthened Steel Produced by Laser Powder Bed Fusion Additive Manufacturing of Gas Atomized Reaction Synthesis (GARS) Powder, Journal of Materials & Design, 216, 2022, 110574. Link

  • Agarwal, M. Butterling, M. O. Liedke, K. H. Yano, D. K. Schreiber, A. C. L. Jones, B. P. Uberuaga, Y. Q. Wang, M. Chancey, H. Kim, B. K. Derby, N. Li, D. J. Edwards, P. Hosemann, D. Kaoumi, E. Hirschmann, A. Wagner, and F. A. Selim; The mechanism behind the high radiation tolerance of Fe–Cr alloys, Journal of Applied Physics, s. 131, 2022, 125903 (Editor’s pick). Link

  • X. Fang, Z. Li, Y. Wang, M. Ruiz, X. Ma, H. , R. Schoell, C. Zheng, D. Kaoumi, Y. Zhu, Achieving Hetero-deformation Induced (HDI) Strengthening and Hardening in Brass by Dual Heterostuctures, Journal of Materials Science & Technology, 98, 2022, 244-2472021. Link

  • Zhao, R. Schoell, M. N. Cinbiz, M. Frost, D. Kaoumi, Creep properties of advanced austenitic steel 709 determined through short experiments under in-situ neutron diffraction followed by TEM characterization, Materials Characterization, 182, 2021. Link

  • Qiu, D. D Macdonald, R. Schoell, J. Hanc, S. Mastromarino, J. R Scullyc, D. Kaoumi, Peter Hosemann, Electrochemical study of the dissolution of oxide films grown on Type 316L stainless steel in molten fluoride salt, Corrosion Science, 186, 2021, 109457. Link

  • K. Duemmler, C. Zheng, C. Baumier, A. Gentils, D. Kaoumi, Helium Bubble Nucleation and Growth in Alloy HT9 through the use of In-Situ TEM: Sequential He-Implantation and Heavy-Ion Irradiation versus Dual-Beam Irradiation,  Journal of Nuclear Materials, 2021, 545, 152641. Link

  • J. Qiu, J. Han, R. Schoell, M. Popovic, E. Ghanbari, D. Kaoumi, J. R Scully, D. D Macdonald*, P. Hosemann, Electrical Properties of thick Oxide scales on pure iron in liquid lead-bismuth eutectic, Corrosion Science, 2020, 176, 109052. Link

  • B. Derby, J. Cooper, T. Lach, E. Martinez, J.K. Baldwin, D. Kaoumi, D.J. Edwards, D.K. Schreiber, B.P. Uberuaga, N. Li*A Pathway to Synthesizing Single-crystal Fe and FeCr Films, Surface and Coatings Technology, 2020, 403, 126346. Link

  • S. Agarwal, M. O. Liedke, A. C. L. Jones, E. Reed, A. A. Kohnert, B. P. Uberuaga,* Y. Q.Wang, J. Cooper, D. Kaoumi, N. Li, R. Auguste, P. Hosemann, L. Capolungo, D. J. Edwards, M. Butterling, E. Hirschmann, A. Wagner and F. A. Selim, A New Mechanism for Void-Cascade Interaction from Non-destructive Depth-resolved Atomic-scale Measurements of Ion Irradiation-induced Defects in Fe, Science Advances, 2020, 6 : 8437. Link

  • C. Zheng, and D. Kaoumi, Dislocation loop evolution in F/M Steel T91 Under In-Situ Ion Irradiation: influence of the presence of initial dislocations, Journal of Nuclear Materials, 540, 2020, 152363. Link

  • R. Schoell, L. Xi, Yuchen Zhao, J. Almer, X. Wu, Z. Yu, Z. Shayer, D. Kaoumi, “In Situ Synchrotron X-ray Tomography and Diffraction of 304 Stainless Steel undergoing Stress Corrosion Cracking”, Corrosion Science, 170, 2020, 108687. Link

  • Y. Zhao, M. Nedim Cinbiz, J-S Park, J. Almer, D. Kaoumi, Tensile Behavior and Microstructural Evolution of a Fe-25Ni-20Cr Austenitic Stainless Steel (Alloy 709) from Room to Elevated Temperatures through In-situ Synchrotron X-ray diffraction characterization and Transmission Electron Microscopy, Journal of Nuclear Materials, 540, 2020, 152367. Link

  • R. Schoell, D. Frazer, C. Zheng, P. Hosemann, D. Kaoumi, In Situ Micro-Pillar Compression Tests of 304 Stainless Steel after Ion Irradiation and Helium Implantation, Journal of Metals (JOM), 2020. Link

  • X.T. Fang, G.Z. He, C. Zheng, X.L. Ma, D. Kaoumi, Y.T. Zhu, Effect of Heterostructure on the Strength and Ductility of Brass, Acta Materialia, Vol 186, March 2020, p. 644-655. Link


  • J. Qiu, D. Macdonald, N. Li, R. Schoell, D. Kaoumi, P. Hosemann, An electrochemical impedance spectroscopic study of oxide films in liquid metal, JOM, 2020. Link


  • M. C. Remillieux, D. Kaoumi, Y. Ohara, M. A. Stuber Geesey, L. Xi, R. Schoell, C. R. Bryan, D. G. Enos, D. A. Summa, B. E. Anderson, Z. Shayer, Detecting and Imaging Stress Corrosion Cracking in Stainless Steel with Application to Inspecting Storage Canisters for Spent Nuclear Fuel, Journal of Nondestructive Testing and Evaluation International (NDT&E Int.), 2020, Vol 109, 102180. Link


  • C. Zheng, E. R. Reese, K. G. Field, E. Marquis, S. A. Maloy, D. Kaoumi, “Microstructure response of ferritic/martensitic steel HT9 after neutron irradiation: effect of temperature”, Journal of Nuclear Materials, 528, 2020, 151845. Link

  • C. Barr*, O. El-Atwani, D. Kaoumi, K. Hattar. “Interplay Between Grain Boundaries and Radiation Damage”, JOM, 71(4), 2019, p.1233-1244. Link

  • C. Zheng, E. R. Reese, K. G. Field, E. Marquis, S. A. Maloy, D. Kaoumi*, “Microstructure response of ferritic/martensitic steel HT9 after neutron irradiation: effect of dose”, Journal of Nuclear Materials, 523 (421-433), 2019. Link

  • D. Kaoumi*, V. Jammot, “Insights into the plastic behavior of irradiated metals through in-situ TEM experiments: formation and evolution of defect-free channels”, Journal of Nuclear Materials, 523, p. 33-42, 2019. Link

  • C. Marsh, R. Schoell, D. Kaoumi*, “Environmental effect on mechanical properties of a gamma-prime strengthened nickel-based alloy: Effect of the surface oxidation and formation of gamma-prime free zones”, Journal of Materials Science and Engineering A, 752, p. 136–144, 2019. Link

  • C. Zheng, R. Schoell, P. Hosemann, D. Kaoumi*, Ion irradiation effects on commercial PH 13-8 Mo maraging steel Corrax, Journal of Nuclear Materials, 514, p. 255-265, 2019. Link

  • C. Zheng*, Jia-Hong Ke, S. Maloy, D. Kaoumi, Correlation of In-situ TEM Observation and Microchemistry Analysis of Radiation-Induced Precipitation and Segregation in Ion Irradiated Ferritic/Martensitic Steel HT9, Scripta Materialia, 162, p. 460-464, 2019. Link

  • C. Zheng, S. Maloy, D. Kaoumi*, “Dose effect on the irradiation induced loop density and burgers vector in Ion irradiated F/M steel HT9”, Philosophical Magazine, 98 (26), p. 2440-2456, 2018. Link

  • J. Liu, D. Kaoumi*, “Use of In-Situ TEM to Characterize the Deformation-Induced Martensitic Transformation in 304 Stainless Steel at Cryogenic Temperature”, Journal of Materials Characterization, 136, 331-336, 2018. Link

  • D. Kaoumi*, J. Liu, “Deformation induced martensitic transformation in 304 austenitic stainless steel: In-situ vs. ex-situ transmission electron microscopy characterization”, Journal of Materials Science & Engineering A, 715, p. 73-82, 2018. Link


  • C. Zheng, D. Kaoumi*, “Radiation-induced swelling and radiation-induced segregation & precipitation in dual beam irradiated Ferritic/Martensitic HT9 steel”, Materials Characterization 134, 152–162, 2017. Link


  • C. Marsh, D. Kaoumi*, “Serrated Tensile Flow in Inconel X750 Sheets: Effect of Heat Treatment”, Materials Science & Engineering A, 707, p. 136–147, 2017. Link


  • Ce Zheng, M. A. Auger, M. P Moody, D. Kaoumi*, Radiation induced segregation and precipitation behavior in self-ion irradiated Ferritic/Martensitic HT9 steel; Journal of Nuclear Materials, v 491, p 162-176, 2017. Link

  • C. Marsh, S. Depinoy, D. Kaoumi*, “Effect of Heat Treatment on the Temperature Dependence of the Fracture Behavior of X-750 alloy”, Materials Science & Engineering A, v 677, p 474-484, 2016. Link


  • Z. Huang, M.D. Abad, M. Rebelo de Figueiredo, D. Kaoumi, N. Li, M. Asta, N. Gronbech-Jensen, P. Hosemann*, “A high temperature mechanical study on PH 13-8 Mo maraging steel”, Materials Science & Engineering A, v. 651, 2016. Link


  • T.R. Allen, D. Kaoumi, J. Wharry, L. Barnard, A. Certain, K. Field, Z. Jiao, G. S. Was, D. L. Morgan, A. T. Motta, C. Topbasi, B. D. Wirth, Y. Yang, “Characterization of Microstructure and Property Evolution in Advanced Cladding and Duct: Materials exposed to High Dose and Elevated Temperature”, Journal of Materials Research, v 30, n 9, p 1246-1274, 2015. Link


  • D. Catalini, D. Kaoumi*, T. Reynolds, and G. Grant, “Dispersoid distribution and microstructure in Fe-Cr-Al ferritic oxide dispersion strengthened alloy prepared by Friction Consolidation”, Metallurgical and Materials Transactions A, v 46, n 10, p 4730-4739, July 9, 2015. Link


  • C. Topbasi*, D. Kaoumi, A. T. Motta, M. A. Kirk, “Microstructural evolution in NF616 (P92) and Fe–9Cr–0.1C-model alloy under heavy ion irradiation”, Journal of Nuclear Materials, v 466, p 179-186, 2015. Link


  • H. Vo, A. Reichardt, C. Howard, M.D. Abad, D. Kaoumi, P. Chou, P. Hosemann*, “Small Scale Mechanical Testing on Proton Beam Irradiated 304 SS from Room Temperature to Reactor Operation Temperature”, Journal of Materials, p1-6, 2015. Link


  • D. Kaoumi*, T. Gautier, J. Adamson, M. Kirk, Using In-Situ TEM to Characterize the Microstructure evolution of Metallic Systems under External Solicitation, Microscopy and Microanalysis, v. 21 S3, 2015. Link


  • D. Kaoumi*, K. Hrutkay, “Tensile deformation behavior and microstructure evolution of Ni-based superalloy 617”, Journal of Nuclear Materials, 454, p 265-273, 2014. Link


  • D. Kaoumi*, J. Adamson, “Self-ordered defect structures in two model F/M steels under in situ ion irradiation”, Journal of Nuclear Materials, 448: p 233–238, 2014. Link


  • K. Hrutkay, D. Kaoumi*, “Tensile deformation behavior of a nickel based superalloy at different temperatures”, Journal of Materials Science and Engineering A, 599, p 196–203, 2014. Link


  • D. Kaoumi*, J. Adamson, M. Kirk, “Microstructure Evolution of Two Model Ferritic/Martensitic Steels under In-situ Ion Irradiation at low doses (0-2dpa)”, Journal of Nuclear Materials, 445 (1–3): p. 12–19, 2014. Link


  • K. Hrutkay, D. Kaoumi, “Tensile Behavior of Inconel 617 vs. Haynes 230: Effects of Temperature and Strain Rate”, Transactions of the American Nuclear Society, 109, 2013. Link


  • J. Goddard, D. Kaoumi, “Precipitate Characterization in Two ODS Steels using Synchrotron XRD of Consolidated Samples and Cu-Kα XRD of Precipitate Extractions” Transactions of the American Nuclear Society, 109, 2013. Link


  • D. Catalini, D. Kaoumi*, A. Reynolds, G. Grant, “Friction Consolidation of MA956 powder”, Journal of Nuclear Materials, 442, S112-S118, 2013. Link


  • D. Catalini, D. Kaoumi*, A. Reynolds and G. Grant, “Friction Consolidation of an Oxide Dispersion Strengthened Steel”, Transactions of the American Nuclear Society, 107, 2012. Link


  • D Kaoumi*, AT Motta, M Kirk, T Faney, B Wirth and J Bentley, “In-situ TEM Studies of Microstructure Evolution under Ion Irradiation for Nuclear Engineering Applications”, Microscopy and Microanalysis, 16, 2, 2010. Link


  • J. Bentley, D.T. Hoelzer, J.T. Busby, A.G. Certain, T.R. Allen, D. Kaoumi*, A.T. Motta, and M.A. Kirk, “TEM Characterization of Crept and Irradiated Nano-structured Ferritic Alloys” Microscopy and Microanalysis, 15, 2, 2009. Link


  • M. A. Kirk*, P. M. Baldo, A. C. Y. Liu, E. A. Ryan, R. C. Birtcher, Z. Yao, S. Xu, M. L. Jenkins, M. Hernandez-Mayoral, D. Kaoumi and A. T. Motta, “In-situ TEM and Ion Irradiation of Ferritic Materials”, Microscopy and Research Technique, 72, 3, p. 182–186, 2009. Link


  • D. Kaoumi*, A. Motta, R. Birtcher, “A Thermal Spike Model of Grain Growth under Irradiation”, Journal of Applied Physics, 104, 7, 2008. Link


  • D. Kaoumi*, A. Motta, R. Birtcher, “Influence of alloying elements on grain-growth in Zr(Fe) and Cu(Fe) thin-films under in situ ion irradiation”, Journal of Nuclear Materials, 382, 2-3, 2008. Link


  • D. Kaoumi*, A. Motta, and R.C. Birtcher, “Grain Growth in Nanocrystalline Metal Thin-Films under In Situ Ion-Beam Irradiation”, Journal of ASTM International, 4, 8, 2007. Link


  • D. Kaoumi*, A.T. Motta, and R.C. Birtcher, “Grain growth in Zr–Fe thin films during in situ ion irradiation in a TEM”, Nuclear Instruments and Methods in Physics Research B, 242, p. 490–493, 2005. Link


    Conference Proceedings



  • A. M. Lopez, M. Owusu-Mensaha, D. Kaoumi, In-situ TEM ion irradiation of oxidized nickel based X-750 alloy, American Nuclear Society proceedings, 2022

  • L. R. Gomez Hurtado, D. Kaoumi, A Literature Review of the Physical Effects of Radiation Damage in Multicomponent Alloys, American Nuclear Society Student conference proceedings, April 2022

  • C. McRobie, R. Schoell, T. Kaspar, D. Schreiber, and D. Kaoumi, In Situ Grain Growth of Nanograined Magnetite under Ion Irradiation at Room Temperature and 500 ℃, Microscopy and Microanalysis, 27, 2021

  • H. Gardner, D. Kaoumi, P. Hosemann, M. Moody and D. Armstrong, Towards development of a nickel-based oxide dispersion strengthened alloy for use in Molten Salt reactors, Microscopy Microanalysis, 27 (Suppl 1), 2021

  • A. Lopez Morales, M. Owusu-Mensah, K. Yano, D. K. Schreiber, D. Kaoumi, In situ TEM investigation of irradiation-induced amorphization of Fe3O4 and γ -Fe2O3, Microscopy and Microanalysis, 27, 2021

  • R. Schoell, D. Frazer, P. Hosemann, D. Kaoumi, Stainless Steel 304 Micro-pillar Mechanical Response to Ion Irradiation and Helium Implantation Under Transmission Electron Microscopy Observation, Microscopy and Microanalysis , Vol 26 S2 , 2020 , pp. 878 – 881

  • M. Owusu-Mensah, J. Cooper, D. Kaoumi In Situ TEM Investigation of Irradiation Induced Amorphization of Fe Oxide, Microscopy and Microanalysis, Vol 26 S2 , 2020 , pp. 882 – 884

  • R. Schoell, C. Zheng, K. Hattar, D. Kaoumi, In Situ Micropillar Compression of Irradiated HT9, Microscopy and Microanalysis , Vol S2 , 2020 , pp. 2420 – 2422

  • J. Kabel, P. Hosemann, R. Schoell, D. Kaoumi, T. Koyanagi, Y. Katoh, Interface characterization of candidate dual-purpose barrier coatings for SiC/SiC accident tolerate fuel cladding, Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Boston, MA, 2019

  • D. Kaoumi, C. Zheng, Microstructure characterization of ion-irradiated Ferritic/Martensitic HT9 steel, Microscopy and Microanalysis, 23, 2017

  • P. Hosemann, D. Frazer, D. Kaoumi and C. Zheng, Microstructural and Nanomechanical Characterization of In-Situ He Implanted and Irradiated fcc Materials, Microscopy and Microanalysis, 23, 2017

  • D. Kaoumi, A. Garde, G. Pan “In-situ Ion Irradiation of ZIRLO® Alloy”, Top Fuel 2016, Boise, ID, USA, 2016

  • P. Hosemann, A. Reichard, A. Lupinacci, C. Howard, H. Vo, M.D. Abad, D. Kaoumi, P. Chou, “Small Scale Mechanical Testing on Ion Beam Irradiated 304SS”, Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Ottawa, ON, Canada, 2015

  • D. Kaoumi*, T. Gautier, J. Adamson, M. Kirk, Using In-Situ TEM to Characterize the Microstructure evolution of Metallic Systems under External Solicitation, Microscopy and Microanalysis, v. 21 S3, 2015.

  • D. Kaoumi, J. Liu, F-L Paul, “Deformation Induced Martensitic Transformation in 304SS”, International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Whistler, BC, Canada, 2015.

  • K. Hrutkay, D. Kaoumi, “Tensile Behavior of Inconel 617 vs. Haynes 230: Effects of Temperature and Strain Rate”, Transactions of the American Nuclear Society, 109, 2013.


  • J. Goddard, D. Kaoumi, “Precipitate Characterization in Two ODS Steels using Synchrotron XRD of Consolidated Samples and Cu-Kα XRD of Precipitate Extractions” Transactions of the American Nuclear Society, 109, 2013.

  • D. Catalini, D. Kaoumi*, A. Reynolds and G. Grant, “Friction Consolidation of an Oxide Dispersion Strengthened Steel”, Transactions of the American Nuclear Society, 107, 2012.

  • D Kaoumi*, AT Motta, M Kirk, T Faney, B Wirth and J Bentley, “In-situ TEM Studies of Microstructure Evolution under Ion Irradiation for Nuclear Engineering Applications”, Microscopy and Microanalysis, 16, 2, 2010

  • J. Bentley, D.T. Hoelzer, J.T. Busby, A.G. Certain, T.R. Allen, D. Kaoumi*, A.T. Motta, and M.A. Kirk, “TEM Characterization of Crept and Irradiated Nano-structured Ferritic Alloys” Microscopy and Microanalysis, 15, 2, 2009

  • D. Kaoumi, A. Motta, R. Birtcher, “In Situ Studies of Phase Stability and Microstructural Evolution in Metal Alloys Under Ion Irradiation in the IVEM at ANL”, Proceedings of the Workshop on the Use of In-Situ TEM-Ion Accelerator Techniques in the Study of Radiation Damage in Solids, The University of Salford, UK, 2009.

  • D. Kaoumi*, A. T. Motta, and M. Kirk, “Characterization and In-Situ Ion-Irradiation of MA957 ODS Steel”, Transactions of the American Nuclear Society, 98, 1, 2008.


  • D. Kaoumi, A. Motta, and R.C. Birtcher. “Irradiation-Enhanced Second-Phase Precipitation in Zr-Fe Nanocrystalline Thin Films”, in Mater. Res. Soc. Symp., 908E, Boston, 2006